'Hi, we are planning to implement a batch and document separator via patch code or 3 of 9 bar code separator sheets in FileNet Capture Professional 5.2 through Kofax Adrenaline Image Proccessing Engine (AIPE 4.10). Although, its fairly staightforward, I'm having difficulty in getting the patch code or bar code to be printed on a sheet of paper and getting recognized by Capture Doc processing component. I have enabled the patch code and bar code detetction in the configuration. However, i think its the manner in which the patch code or bar code is being generated and printed on paper which is causing it not to be recognized.
![]()
CaptureNow Kofax detects all six patterns of I, II, III, IV, VI, T and Bidirectional, while. Patchcode Scanning Profile from Source; Patchcode Separator Sheet from. 3 Select Document Separator as the Separator Sheet Type. 4 Select the Batch Class Name for which you wish to print a patch code separator sheet. 5 Select a Patch Code Type and the document separator is ready to print.
I used Kodak's standard patch code (Path 1 to 6) and modified it to form a horizontal patch and stuck it on a piece of paper though MSPaint and took a print out. For 3of 9, I used online 3 of 9 bar code generators to create the bar code and stuck the image on a piece of paper and took a print out. In both the cases, the patch code and the bar code are not being read. However, I have a sheet on which there was a pre-pprinted bar code (3 of 9), and when i scan this sheet, the bar code is read successfully.
I just want to know what am i missing. Any help would be appreciated. Just FYI, for Patch Code Detection in Doc Processing Component, I have enabled it and set the left offset to 2.00 For Bar Code Detection in Doc Processing Component, I have enabled Detection, verify checksum, beep and ratio 2:1. Height - 0.50 and width 0.014. Set the bar code type as 3 of 9 and search direction as Horizontal, Vertical, Reverse Horiz and Reverse Vertical and Quality as Poor. Min lines per bar code as 1 Max Pages per bar code as 2 Max Bar codes per line as 1.
Also, all the other options like Edge Enhancement, enhancement, Removal and FormsId have been disabled. I used the same procedure for QR codes and it was being detected succesfully.
So am wondering how to get the patch code and 3 of 9 bar code printed and detected. Please can anyone help me with this.'
Here is a good set of patch codes that you can use. They are set to read 2.00 inches from the left margin. Thanks, Nan Chambers DOA ITSD Application Technology Services Bureau (406) 444-2790 [email protected] From: paulosousa via filenet-l mailto:[email protected] Sent: Wednesday, November 25, 2009 11:52 PM To: Chambers, Nan Subject: RE:filenet-l Patch Code and Bar code separator sheets Posted by paulosousa (SC) on Nov 26 at 2:03 AM as helpful Hi Kartik just for the barcode 3 of 9: If you are using checksum, try generating the barcode with. at the begin and end. For example if you want 123456 generate.123456. regards, Paulo Sousa. Hi Paulo, Thank you very much for that checksum info.
Although i had done some research on that, the online bar code generators which i was using did not support checksum character. Finally found one which worked like a charm.
Hi Nan, Not sure which patch codes you meant, but i came across this amazing post in Kofax forum where in a guy named wolfgang had created an app to generate the patch codes. Tried it and it worked like a charm too. Here's the link: http://forums.kofax.com/viewtopic.php?t=2420.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |